Preferred by Professionals for More Than 25 Years
Cyanoacrylate
Multiple Viscosities, Multiple Sizes, Unlimited Uses
Thick
700 CPS
Thick, gap-filling up to 0.007"
Up to 30 seconds working time
Approximately 45 seconds drying time
Available sizes:
5.5 gal (44 lbs) - Item # I-44700
1 gal (8 lbs) - Item # I-808700
16 oz - Item # I-16700
8 oz - Item # S-380
2 oz - Item # S-320
1 oz - Item # S-310
0.5 oz - Item # S-305
Medium
300 CPS
Thick, gap-filling up to 0.006"
Up to 20 seconds working time
Approximately 30 seconds drying time
Available sizes:
16 oz - Item # I-16300
Medium
100 CPS
Thick, gap-filling up to 0.005"
Up to 10 seconds working time
Approximately 15 seconds drying time
Available sizes:
5.5 gal (44 lbs) - Item # I-44100
1 gal (8 lbs) - Item # I-808100
16 oz - Item # I-16100
8 oz - Item # S-280
2 oz - Item # S-220
1 oz - Item # S-210
0.5 oz - Item # S-205
Thin
50 CPS
Excellent penetrating capabilities. Bonds tight fitting joints for most materials.
Up to 5 seconds working time
Approximately 8 seconds drying time
Type: Ethyl Cyanoacrylate
Available sizes:
16 oz - Item # I-1650
Thin
5 CPS
Excellent penetrating capabilities. Bonds tight fitting joints for most materials.
Up to 3 seconds working time
Type: Ethyl Cyanoacrylate
Available sizes:
5.5 gal (44 lbs) - Item # I-445
1 gal (8 lbs) - Item # I-8085
16 oz - Item # I-1605
8 oz - Item # S-180
2 oz - Item # S-120
1 oz - Item # S-110
0.5 oz - Item # S-105
Special Order
CALL FOR DETAILS
Type: Ethyl Cyanoacrylate, Alkoxy-Alkyl Cyanoacrylate
Industrial applications
High temp
Other viscosities
Other sizes
Private label
Specialty Cyanoacrylates
Rubber Toughened Black, Odorless, Non-Blooming
Rubber Toughened Black
300 CPS
Medium viscosity, gap filling. Used where flexibility and vibration resistance are needed.
Up to 25 seconds working time
Approximately 35 seconds drying time
Type: Ethyl Cyanoacrylate
Available sizes:
16 oz - Item # G-16300
2 oz - Item # G-2520
1 oz - Item # G-2510
Odorless, Non-Blooming
5 - 100 CPS
Odorless and non-blooming. No whitening or blooming occurs on electrical components. Also safe on white foam & plastic. Excellent for models. Bonds tight fitting joints.
Viscosity: 5 cps and 100 cps
Up to 10 seconds working time
Up to 15 seconds drying time
Type: Alkoxy-Alkyl Cyanoacrylate
Available sizes:
16 oz - 5 CPS - Item # R-1605
2 oz - 100 CPS - Item # R-220
2 oz - 5 CPS - Item # R-120
1 oz - 5 CPS - Item # R-110
Accelerators and debonders
Cyanoacrylate Activators, Debonder, Sprays and Refills, DIY Kits
Accelerator
ACETONE BASE
Cyanoacrylate activator for instant bonding. Extremely fast acting. Strong solvent base accelerator forces cyanoacrylate to cure instantly. Expands gap filling capabilities.
California Proposition 65 Warning: This product contains N,N-Dimethyl-p-toluidine, which is known to the state of California to cause cancer. For more information, go to http://www.p65warnings.ca.gov
Available sizes:
8 oz - Item # A-80 (refill size)
2 oz - Item # A-20 (comes with spray cap)
Mild Accelerator
HEPTANE BASE
Mild activator for instant bond. Fast acting and generally safe for use on foam, plastic & painted surfaces. Mild solvent base accelerator helps cyanoacrylate cure instantly. Expands gap filling capabilities.
California Proposition 65 Warning: This product contains N,N-Dimethyl-p-toluidine, which is known to the state of California to cause cancer. For more information, go to http://www.p65warnings.ca.gov
Available sizes:
8 oz - Item # A-801 (refill size)
2 oz - Item # A-201 (comes with spray cap)
Make your own accelerator with our 1 Gallon Kit. Just add contents to 1 gallon of acetone purchased at your local hardware store.
California Proposition 65 Warning: This product contains N,N-Dimethyl-p-toluidine, which is known to the state of California to cause cancer. For more information, go to http://www.p65warnings.ca.gov
Available sizes:
1.2 oz - Item # H-012
Debonder
ACETONE BASE
Use this debonder to unstick fingers and general debonding. A few drops will dissolve the cyanoacrylate, then wash off with soap & water
Available sizes:
8 oz - Item # D-80
2 oz - Item # D-20
Epoxy and Industrial Adhesives
Quick Setting, High Strength, Waterproof
5-Minute Epoxy
TWO-PART
Quick setting two-part epoxy delivers a high strength, waterproof bond. Each package has one bottle of resin and one bottle of hardener.
Working time : 3 minutes
Set time : 5 minutes
Available sizes:
8 oz - Item # E-058 (Consists of one 4 oz Resin + one 4 oz Hardener)
4 oz - Item # E-05 (Consists of one 2 oz Resin + one 2 oz Hardener)
Anaerobic Adhesives
INDUSTRIAL
Threadlockers
Thread Sealants
Retaining Compounds
Available sizes:
Call or email for details
Accessories
Empty Bottles, Tops, Caps, Nozzles, Spouts, Precision Applicators, and More
Empty Bottles
MANY SIZES
HDPE bottles are great for making smaller sizes of glue from larger bottles. Countless other uses.
Available sizes:
16 oz cylindrical, natural - Item # B-160
8 oz cylindrical, natural - Item # B-080
8 oz cylindrical, clear - Item # B-080CLRCYL
4 oz cylindrical, natural - Item # B-040NATCYL
2 oz cylindrical, clear - Item # B-020CLRCYL
2 oz cylindrical, natural - Item # B-020NATCYL
2 oz oval - Item # B-020
1 oz oval - Item # B-010
0.5 oz oval - Item # B-005
Nozzles + Caps
0.5 oz, 1 oz, 2 oz
Replacement top (nozzle) and cap for 2 oz, 1 oz, and 0.5 oz E-Z Bond oval bottles.
Available quantities:
Pack of 25 - Item # T-222
Yorker Spout Caps
8 oz, 16 oz
Replacement spout top and cap for 16 oz and 8 oz E-Z Bond bottles.
Available quantities:
Each, 16 oz - Item # YC-28
Each, 8 oz - Item # YC-24
Precision Extender Tips
FITS ON NOZZLE
Extension tips for precision work or very small gap filling. Fits on T-222 nozzles (2 oz, 1 oz, and 0.5 oz E-Z Bond oval bottles).
Available quantities:
Pack of 3 Bags (50 Tips per Bag) - Item # T-111
Precision Applicators
ONE SIZE
Precision applicator for medium and thick glue. Squeeze bulb to create a vacuum, then insert tip into glue. Release bulb to draw glue into applicator. Squeeze bulb again to release glue for precision work or very small gap filling.
Available quantities:
Pack of 30 Pieces - Item # T-333